[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PSUBS-MAILIST] RE: Hydrophones
Thanks Alec
Can you furnish us with the bore size and length of the fitting ,also would
one only need one such fitting and where does one locate it on the sub.
All the best
GlenSA
----- Original Message -----
From: "Smyth, Alec" <Alec.Smyth@compuware.com>
To: <personal_submersibles@psubs.org>
Sent: Wednesday, January 20, 2010 4:46 PM
Subject: RE: [PSUBS-MAILIST] RE: Hydrophones
Hello Glen,
Just a clarification. You can bolt them on, but you do need to use an
elementary fitting in doing so. Just take a 1" stainless round, drill a
hole in it, finish the end faces, and weld into the hull. The connector
needs that smooth face for it's O ring to seat on, it's not that you
drill a hole directly in the hull and plug the hole with the connector.
Thanks,
Alec
The contents of this e-mail are intended for the named addressee only. It
contains information that may be confidential. Unless you are the named
addressee or an authorized designee, you may not copy or use it, or disclose
it to anyone else. If you received it in error please notify us immediately
and then destroy it.
From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org] On Behalf Of glen brown
Sent: Tuesday, January 19, 2010 5:21 PM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] RE: Hydrophones
Thanks Jon
I can bolt it on without a thru hull fitting spares the urgency.A
couple of months at least I see where persistence got its name.
Glen SA
----- Original Message -----
From: "Jon Wallace" <jonw@psubs.org>
To: <personal_submersibles@psubs.org>
Sent: Wednesday, January 20, 2010 12:04 AM
Subject: Re: [PSUBS-MAILIST] RE: Hydrophones
The Subconn BH4F has a 7/16x20 machine threaded shaft 3/4 inch long.
You can either drill a hole and bolt it in place, or thread it into a
thru-hull manifold appropriately machined for 7/16x20 threads.
Check PSUBS or Subconn website for detailed info on Connector BH4F.
If you can't wait for delivery and use something from a local
supplier, I recommend you wire it as per Design Guidelines for
Personal Submersibles Section 3.1 at
http://www.psubs.org/cgi-bin/guidelines/chapter.cgi/guidelines/PSUBS/D
G since David should now be wiring his projects according to the
standard as well.
Jon
glen brown wrote:
Thanks David
The problem with the standard thru hull you are suggesting would take
in excess of a month to reach me in this part of the world ,is it a
skin fitting type or does it also need to be welded in?does one
attach it to the C.T or some where else .
Glen SA
**********************************************************************
**
**********************************************************************
**
**********************************************************************
** The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either you, or someone you know, requested you receive
messages from our organization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of our
server receiving your request.
PSUBS.ORG
PO Box 53
Weare, NH 03281
603-529-1100
**********************************************************************
**
**********************************************************************
**
**********************************************************************
**
------------------------------------------------------------------------
--------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 270.14.150/2632 - Release Date:
01/19/10 07:34:00
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.
PSUBS.ORG
PO Box 53
Weare, NH 03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.
PSUBS.ORG
PO Box 53
Weare, NH 03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.432 / Virus Database: 270.14.151/2633 - Release Date: 01/19/10
17:49:00
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.
PSUBS.ORG
PO Box 53
Weare, NH 03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************