[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] my optronic mast idea with sketch




That's cool.  Second hand systems seem to be easily obtainable.

For your condensation experiment, don't forget that cold air can't hold nearly as much moisture as warm air. To duplicate diving conditions in a water vapor rich environment, you'll want to have the CRT in a container filled with warm air (30+ C) with very high humidity (90% or so), surrounded by a very cool (7-10C) outer environment like a cold water tank. The worst environment is one in which the difference between current temp and dew point is very small.



Jens Laland wrote:
Jon

I did not mean to indicate the use of a proprietary security system, but
rather using second-hand (or NOS) surveillance type of video cameras,
often obtainable through eBay, or otherwise.

Besides, I recently purchased 3 identical, brand new battery powered
monochrome 5" CRT monitors from a local close-out sale, paying $8 pro
item. So I stowed away two of them to serve as spare parts, whilst the
last one was totally stripped down, and now to be put into a new custom
built, sturdy aluminum housing, complete with better quality on vital
components such as potentiometers etc.

This special monitor is then planned to undergo operational tests within a
cold, but damp environment to see if its possible to avoid internal
condensation at all.

Personally I am not that concerned with some extra 2-300 mA, as my
intended use of an optronic mast is solely to improve my own line of
vision while cruising with a trimmed diesel at surface (for which I would
probably also need an air induction mast).





************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************