[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST] Original KL-250 Blown Dome Specs



Glen,

Please keep in mind that the regulator that I am speaking of was not in the normal list of Poseidon products.  You will have to make a special inquiry.

R/Jay

 

 

Resepectfully,

Jay K. Jeffries

Andros Is., Bahamas

 

Save the whales, collect the whole set.

 

 

 

From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of glen brown
Sent: Sunday, August 23, 2009 6:52 AM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] Original KL-250 Blown Dome Specs

 

Hi Jay

Thanks for your input ,being a commercial diver using Poseidon and Kirby Morgan has become a religion to me over the years , not because they the smoothest ,but to me have proven there reliability .The cyklon 300 and 5000 when there lp valve is full open delivers 20 bar this should be enough pressure to over come the pressure at 100meters, and also ok for my bail out  supply .The deepest I have dived is only 65meters, so diving to 100meters is something I am looking forward to .

 

I will speak to some of  old tech divers ,thanks for bringing that to my attention.

All the best

Glen SA