[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] acrylic dome escape pod question for Carsten.



Hi Carsten.
 
Are you saying the only thing holding the dome in place is a rubber holder (or with Peppers the bayonet lock) and the water pressure is
all that is holding the dome in place against the rubber holder? If this is true, how would you release the dome without first counteracting the
outside water pressure against the dome if you had exhausted all your interior air without letting water in to pressurize the remaining air?
 
If I am intrepreting this correctly, wouldn't this require you to either have enough interior air left to release the dome off, or else you would have to
partially flood the hull to pressurize the remaining air in order for the dome to release?
 
Or did I totally misunderstand you? Thanks Carsten.
 
Kindest Regards,
Bill Akins.
 
 
----- Original Message -----
Sent: Monday, April 25, 2005 5:11 PM
Subject: Re: [PSUBS-MAILIST] acrylic dome escape pod question for Carsten.

Hi Carsten.
 
If someone used the acrylic dome like that, how would they detach it
quickly from its hinge so it could float free?
How does this procedure work? Thanks.
 
Kindest Regards,
 
Bill Akins.


Hi Bill - no hinges, just rubber holder inside or as Peppers has - a
bajonet lock.

But if some of the guys has the time and possiblity to design a dome
hatch hinges outside system which can be release from inside - this
would be a nice additional saftey tool for any Psubs with domes on top
of the hull or sail.

best regards Carsten




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************