|
Thanks Jon, I wouldn't mind, but you might have to twist Alecs arm a bit. ;} I need to add some clearance between the plate and it's seat in the model and get with Alec to find out exactly what size of O-ring he used and the exact gland size. Then I could add all the measurement's to the drawings. You could start the page with the pictures you've already seen. Since there are several plate thru hull designs out there, it might be good to have them all grouped together some way. Regards, Szybowski > Date: Mon, 23 Feb 2009 22:53:59 -0500 > From: jonw@psubs.org > To: personal_submersibles@psubs.org > Subject: Re: [PSUBS-MAILIST] Alec's Plate Thru Hull Assembly > > > Nice design by Alec and drawing by Brent. Any objection from either of > you with putting this up on the website? I think we should find a place > on the website for some of these designs rather than have them get lost > in the mailing list. > > Jon > > > > Brent Hartwig wrote: > > > > > > * Hello Subdudes, * > > * * > > * Alec was nice enough to send me a couple of his drawings of the > > plate thru hulls on his subs. I worked up a 3D assembly model based > > off his drawings and pictures. I think they are reasonable close to > > what Alec has. I thought Alec's welded in ring was steel when I made > > the CAD assembly, but both the plate and ring are 316 SS. * > > * * > > * So you guys can get a good idea of how they work, here are a couple > > pictures of the 3D assembly. * > > > > http://cid-5085d10eb6afe47c.skydrive.live.com/browse.aspx/Alec%7C4s%20Plate%20Thru%20Hull%20Basic%20Configuration > > > > * > > Regards, * > > * Szybowski * > > > > > > > > > > > ************************************************************************ > ************************************************************************ > ************************************************************************ > The personal submersibles mailing list complies with the US Federal > CAN-SPAM Act of 2003. Your email address appears in our database > because either you, or someone you know, requested you receive messages > from our organization. > > If you want to be removed from this mailing list simply click on the > link below or send a blank email message to: > removeme-personal_submersibles@psubs.org > > Removal of your email address from this mailing list occurs by an > automated process and should be complete within five minutes of > our server receiving your request. > > PSUBS.ORG > PO Box 53 > Weare, NH 03281 > 603-529-1100 > ************************************************************************ > ************************************************************************ > ************************************************************************ > |