[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] a-455 steel

To: <personal_submersibles@psubs.org>
Subject: Re: [PSUBS-MAILIST] a-455 steel
From: "Randy & Linda" <erjlhj@cox.net>
Date: Fri, 9 May 2008 22:08:55 -0700
References: <c99.25983e95.3555f172@aol.com>
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

HI Jim

My plans are to use the dual shield method whenever i use mig on pressure related areas. That is I will use gas in conjuction with the shielded wire. Do you know of a problem with this method for our application?

thanks

Randy

----- Original Message -----

From: ShellyDalg@aol.com

To: personal_submersibles@psubs.org

Sent: Friday, May 09, 2008 11:26 AM

Subject: Re: [PSUBS-MAILIST] a-455 steel

Hi Jim. What is your concern about gas shielded mig ? Frank D.

Wondering what's for Dinner Tonight? Get new twists on family favorites at AOL Food.

Follow-Ups:
- Re: [PSUBS-MAILIST] a-455 steel
  - From: "Jim Kocourek" <kocpnt@tds.net>

References:
- Re: [PSUBS-MAILIST] a-455 steel
  - From: ShellyDalg@aol.com

Prev by Date: Re: [PSUBS-MAILIST] a-455 steel
Next by Date: Re: [PSUBS-MAILIST] uneven charging
Previous by thread: Re: [PSUBS-MAILIST] a-455 steel
Next by thread: Re: [PSUBS-MAILIST] a-455 steel
Index(es):
- Date
- Thread