Re: [PSUBS-MAILIST] gluing O-ring into grove?

[jbarlow@bjservices.ca]

Yes we also use it for that, but due to its sticky nature (I think some
heavy greases would work as well) we use it to hold O-rings in place.

Jay.




                                                                                                                                                
                      Bob Duncan                                                                                                                
                      <katsurencho@yahoo.com>           To:       personal_submersibles@psubs.org                                               
                      Sent by:                          cc:                                                                                     
                      owner-personal_submersible        Subject:  Re: [PSUBS-MAILIST] gluing O-ring into grove?                                 
                      s@psubs.org                                                                                                               
                                                                                                                                                
                                                                                                                                                
                      2004-01-13 13:45                                                                                                          
                      Please respond to                                                                                                         
                      personal_submersibles                                                                                                     
                                                                                                                                                
                                                                                                                                                




Dow Corning 111 is what we use on threads, such as pipe threads. So that
the surfaces won't gall or bind.
  bob duncan

jbarlow@bjservices.ca wrote:

 Dow Corning 111 grease is made for this application.

 Jay.





 William Alford
 To: personal_submersibles@psubs.org
 Sent by: cc:
 owner-personal_submersible Subject: [PSUBS-MAILIST] gluing O-ring into
 grove?
 s@psubs.org


 2004-01-12 13:38
 Please respond to
 personal_submersibles






 I'm doing some pressure checks on a door seal mechanism. A large dia.
 o-ring
 fits into a groove around the door entrance. It has been machined to
 correct
 oring specs, but will not stay in the groove when door opens. I've not
 seen
 any
 recommendations that o-rings may be glued in the groove since they are
 supposed
 to be somewhat movable to seal against the groove/door junction. But since
 these movements are quite small (mm), does anyone have experience with
 using a
 fl! exible gasket material/glue to hold the o-ring into place?
 William Alford


 *********************************************
 * This e-mail was virus scanned upon receipt.
 *********************************************









 ******************************************
 * This e-mail was virus scanned when sent.
 ******************************************




Two guiding principles govern Israel Naval Commando doctrine:

1.Every defense system is vulnerable.

2.The enemy can deal with weapons and operational methods that are known;
for that reason, naval commandos use imagination, daring and initiative, to
create situations which cannot be anticipated.


Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes


*********************************************
* This e-mail was virus scanned upon receipt.
*********************************************










******************************************
* This e-mail was virus scanned when sent.
******************************************