[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] shapeable incompressable filler..any ideas?

To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] shapeable incompressable filler..any ideas?
From: Marcus Cole <marcus.cole@sympatico.ca>
Date: Wed, 10 Jul 2002 17:06:42 -0400
In-Reply-To: <3D2B5FC5.13918.3043E1@localhost>
References: <200207090120.g691K3St012633@aten.its.uow.edu.au><200207050116.g651GcG3029056@aten.its.uow.edu.au>

Hello Everyone,

I was reading the machinery's handbook back at work and i found out that rubber,
although very elastic, isn't at all that compressable. Could Erik use lots of rubber band
in this purpose, maybe bonded as needed to keep it in shape? Any 1$ store could
provide lots of them.

just a thought,
Marcus

ALLEN'S AXIOM
When all else fails, read the directions.

Follow-Ups:
- Re: [PSUBS-MAILIST] shapeable incompressable filler..any ideas?
  - From: Erik Michael Muller <emm03@uow.edu.au>

References:
- [PSUBS-MAILIST] shapeable incompressable filler..any ideas?
  - From: Erik Michael Muller <emm03@uow.edu.au>
- Re: [PSUBS-MAILIST] measurment of CO content.
  - From: Erik Michael Muller <emm03@uow.edu.au>
- Re: [PSUBS-MAILIST] shapeable incompressable filler..any ideas?
  - From: jeffpost@rawbw.com

Prev by Date: [PSUBS-MAILIST] FWD: Keel Laying Ceremony To Be Held For Texas (SSN 775)
Next by Date: [PSUBS-MAILIST] media request
Index(es):
- Chronological
- Thread