[PSUBS-MAILIST] SeaQuestor progress

[hank pronk via Personal_Submersibles]

 Dave, pretty clever using tin foil. Hank
    On Friday, May 3, 2019, 9:02:41 PM MDT, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hi Guys, working on the first inner mold form for the ballast tank today. Sliced the foam to 1/4" sheets, and trapazoid shapes to sit over each of the tribs. Then tapped it into place and then spray glued and tinfoil applied to protect the foam. Tomorrow a couple of coats of wax and then the first layer of matt glass. The inner shell will be attached to the exoskeleton to create the ballast tanks. Plan is 4 total, two aft and two adjacent to the rear pilot.  Now that i got the form work dialed in, three more to go.
David_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190504/75553b01/attachment.html>