[PSUBS-MAILIST] SeaQuestor progress

Sat May 4 03:58:39 EDT 2019

Good progress David,
enjoying following the process.
Alan

> On 4/05/2019, at 3:01 PM, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi Guys, working on the first inner mold form for the ballast tank today. Sliced the foam to 1/4" sheets, and trapazoid shapes to sit over each of the tribs. Then tapped it into place and then spray glued and tinfoil applied to protect the foam. Tomorrow a couple of coats of wax and then the first layer of matt glass. The inner shell will be attached to the exoskeleton to create the ballast tanks. Plan is 4 total, two aft and two adjacent to the rear pilot.  Now that i got the form work dialed in, three more to go.
> 
> David
> <Image8566453130185991844.jpg>
> <Image729728320909630884.jpg>
> <Image3786464166389675499.jpg>
> <Image7809364489070816500.jpg>
> <Image244334802538592248.jpg>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles