[PSUBS-MAILIST] (no subject)

[hank pronk via Personal_Submersibles]

 Alan,No I am building an oven just for the small dome at least for now.  River is a wealth of knowledge and always willing to help.  Imagine what he has learned getting P6 certified.Hank    On Tuesday, August 20, 2019, 1:49:09 PM MDT, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hank,that's great. Are you going to make it big enough to fit a dome pressingmachine in it? River is popping up everywhere. He could be a great helpwith the temperature control system.Alan

On 20/08/2019, at 10:49 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


Hi All,I have been very busy working on E3000 since returning from Montana.  I have bored out my port frame and re-machined it to except a 12 inch 90 degree dome .  I am now working on an oven for annealing.    River has helped me with some fantastic fabrication drawings.  I will be machining the dome myself from a block  of acrylic from Reynolds Polymer.Hank

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190820/0f9d2764/attachment.html>