[PSUBS-MAILIST] (no subject)

[Alan via Personal_Submersibles]

Hank,
that's great. Are you going to make it big enough to fit a dome pressing
machine in it? River is popping up everywhere. He could be a great help
with the temperature control system.
Alan


> On 20/08/2019, at 10:49 PM, hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi All,
> I have been very busy working on E3000 since returning from Montana.  I have bored out my port frame and re-machined it to except a 12 inch 90 degree dome .  I am now working on an oven for annealing.    River has helped me with some fantastic fabrication drawings.  I will be machining the dome myself from a block  of acrylic from Reynolds Polymer.
> Hank
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190821/4d86304e/attachment.html>