[PSUBS-MAILIST] 3D Printer plans for CO2 Scrubber

[Gregory Snyder via Personal_Submersibles]

Alec,
For the record, you are awesome. 

> On Apr 4, 2015, at 9:00 AM, via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi Alec,
> 
> Thanks for sharing.  Perfect design for our sub.  Are the part and STL files available to share?
> 
> Mark...
> 
> ---- Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote: 
>> Hi Mark,
>> 
>> See http://www.psubs.org/projects/1234567810/printedscrubber/
>> 
>> Jon, perhaps we can make this open source by putting the files out on the
>> website somewhere?
>> 
>> 
>> Thanks,
>> 
>> Alec
>> 
>> On Fri, Apr 3, 2015 at 8:49 PM, via Personal_Submersibles <
>> personal_submersibles at psubs.org> wrote:
>> 
>>> Hello Psubs group,
>>> 
>>> Has anyone built a CO2 scrubber using a 3D printer that would be willing
>>> to share your plans and the STL files?  In return, I would be glad to build
>>> the plastics parts for anyone in the group.  Our 3D printer is capable of
>>> 12" x 12" x 12".
>>> 
>>> Thanks,
>>> 
>>> Mark...
>>> 910-638-5229
>>> _______________________________________________
>>> Personal_Submersibles mailing list
>>> Personal_Submersibles at psubs.org
>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles