[PSUBS-MAILIST] 3D Printer plans for CO2 Scrubber

[via Personal_Submersibles]

Hi Alec,

Thanks for sharing.  Perfect design for our sub.  Are the part and STL files available to share?

Mark...

---- Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote: 
> Hi Mark,
> 
> See http://www.psubs.org/projects/1234567810/printedscrubber/
> 
> Jon, perhaps we can make this open source by putting the files out on the
> website somewhere?
> 
> 
> Thanks,
> 
> Alec
> 
> On Fri, Apr 3, 2015 at 8:49 PM, via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
> 
> > Hello Psubs group,
> >
> > Has anyone built a CO2 scrubber using a 3D printer that would be willing
> > to share your plans and the STL files?  In return, I would be glad to build
> > the plastics parts for anyone in the group.  Our 3D printer is capable of
> > 12" x 12" x 12".
> >
> > Thanks,
> >
> > Mark...
> > 910-638-5229
> > _______________________________________________
> > Personal_Submersibles mailing list
> > Personal_Submersibles at psubs.org
> > http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> >