[PSUBS-MAILIST] 3D Printer plans for CO2 Scrubber

[Bob Travis via Personal_Submersibles]

Would it be possible to get the stl file?  I just found out that I have access to a 3D printer as well

Sent from my iPhone

> On Apr 4, 2015, at 7:10 AM, Gregory Snyder via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Alec,
> For the record, you are awesome. 
> 
>> On Apr 4, 2015, at 9:00 AM, via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> Hi Alec,
>> 
>> Thanks for sharing.  Perfect design for our sub.  Are the part and STL files available to share?
>> 
>> Mark...
>> 
>> ---- Alec Smyth via Personal_Submersibles <personal_submersibles at psubs.org> wrote: 
>>> Hi Mark,
>>> 
>>> See http://www.psubs.org/projects/1234567810/printedscrubber/
>>> 
>>> Jon, perhaps we can make this open source by putting the files out on the
>>> website somewhere?
>>> 
>>> 
>>> Thanks,
>>> 
>>> Alec
>>> 
>>> On Fri, Apr 3, 2015 at 8:49 PM, via Personal_Submersibles <
>>> personal_submersibles at psubs.org> wrote:
>>> 
>>>> Hello Psubs group,
>>>> 
>>>> Has anyone built a CO2 scrubber using a 3D printer that would be willing
>>>> to share your plans and the STL files?  In return, I would be glad to build
>>>> the plastics parts for anyone in the group.  Our 3D printer is capable of
>>>> 12" x 12" x 12".
>>>> 
>>>> Thanks,
>>>> 
>>>> Mark...
>>>> 910-638-5229
>>>> _______________________________________________
>>>> Personal_Submersibles mailing list
>>>> Personal_Submersibles at psubs.org
>>>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> 
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles