[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST] Valve Advice

Hi James,
 
I use 1/4" Swagelok valves for the HP lines. Ball valves for the hull stops, needle valves for control.
 
 
Thanks,

Alec


The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it.

From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of James Frankland
Sent: Wednesday, January 04, 2012 12:17 PM
To: personal_submersibles@psubs.org; member-forum@psubs.org
Subject: [PSUBS-MAILIST] Valve Advice

Hi All,
 
Does anyone have any advice as to what type of valves i should use for the high pressure air control?

I have all my hull stop valves and vent valves sorted, these are just the last few.  Plans call for Diaphragm valves.
 
But, my system will be 3000psi, not the 150 ish George used.
 
I believe Alec uses needle valves? 
 
Im not sure what to get.  Needle? Diaphragm?  Ball? 
 
The system is going to be more or less as per the plans but 3000psi and with double tanks fitted.
 
Any advice as to what other people have used much appreciated. 

Kind Regards
James