[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PSUBS-MAILIST] Valve Advice

To: personal_submersibles@psubs.org, member-forum@psubs.org
Subject: [PSUBS-MAILIST] Valve Advice
From: James Frankland <jamesf@guernseysubmarine.com>
Date: Wed, 4 Jan 2012 17:16:50 +0000
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Hi All,

Does anyone have any advice as to what type of valves i should use for the high pressure air control?

I have all my hull stop valves and vent valves sorted, these are just the last few. Plans call for Diaphragm valves.

But, my system will be 3000psi, not the 150 ish George used.

I believe Alec uses needle valves?

Im not sure what to get. Needle? Diaphragm? Ball?

The system is going to be more or less as per the plans but 3000psi and with double tanks fitted.

Any advice as to what other people have used much appreciated.

Kind Regards

James

Follow-Ups:
- RE: [PSUBS-MAILIST] Valve Advice
  - From: "Smyth, Alec" <Alec.Smyth@compuware.com>
- Re: [PSUBS-MAILIST] Valve Advice
  - From: Clifford Redus <cliffordredus@sbcglobal.net>

Prev by Date: Re: [PSUBS-MAILIST] GIZMAG: SeaBird claimed to be world's fastest personal submarine -- and it doesn't even have a motor
Next by Date: RE: [PSUBS-MAILIST] Valve Advice
Previous by thread: [PSUBS-MAILIST] Hydrostatic Test of Model?
Next by thread: RE: [PSUBS-MAILIST] Valve Advice
Index(es):
- Date
- Thread