The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it.
From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org] On Behalf Of James
Frankland
Sent: Tuesday, April 26, 2011 11:25 AM
To:
personal_submersibles@psubs.org
Subject: [PSUBS-MAILIST]
Depth\Pressure GaugeHi All,
I have a couple of questions regarding plumbing as im at that stage now, at
last. Ive nearly completed everything else.
1. Depth Gauge. Where is this supposed to go on the standard
K350? Dont tell me im going to have to add another 1/2 inch pipe nipple
pleeeaasse. I've stuck fairly rigidly to the plans but looking at them
now, i cant see where its supposed to go. Also looking at pictures of
other peoples subs, they all seem to have the depth gauge mounted
to a standard 1/2 inch nipple. I cant roll my sub around any more so
i really dont want to have to weld in another pipe nipple....Better get
practicing my overhead welding...? Could i pipe it off the high
pressure air for the forward tank maybe?
2. Same subject. Dan's Persistance seems to have some sort of
diaphram on the other end of the depth gauge inlet. Whats that?
3. There seems to be litterally hundreds of different pressure gauges
i could get. Anyone recomend anything good?
Thanks as always
James