Dean ,
It goes active when you plug in the transducer cable . With the headphones plugged in you can go thru the operating menu to select the parameters you want , like " VOX "or "push to talk" etc.
The operators manuals for the units you have are available on their website . Along the top pull down menu click on "extras", then click on "library files". Plenty of bed side reading !
Dan
----- Original Message -----
Sent: 8/29/2010 12:48:54 PM
Subject: Re: [PSUBS-MAILIST] Underwater Communications
Dan or Cliff I have another question for you.
How do you turn the 2010 on? It seems a little silly to
put in a bucket of water hehhe
Dean
In a message dated 8/29/2010 10:37:36 A.M. Central Daylight Time, Recon1st@aol.com writes:
Dan that's what I thought. Thanks much for the input.
Dean
In a message dated 8/28/2010 2:59:04 P.M. Central Daylight Time, lanceind@earthlink.net writes:
Dean,
When you cut the transducer extension cable that comes with CDK-6 kit there is an outer braided aluminum shield and one center copper conductor cable. You will need to solder both the copper conductor and the braided shield to corresponding pins on the electrical penetrator so there is continuity for proper functioning of the comms. ( Just gather the braided shield together enough so it fits into one of the conductor pins on the penetrator).
Dan Lance
----- Original Message -----
Sent: 8/28/2010 1:11:14 PM
Subject: Re: [PSUBS-MAILIST] Underwater Communications
Dan I have just received my SSB-2010 and a STX-101. I am confused on what you
mean by reconnect the outer shield. I have not received my CDK-6- kit yet but I am
thinking a couple of wires with a braided or aluminum shield.
Do you mean attaching the shield with a thru conductor?
Dean
In a message dated 8/27/2010 6:51:00 P.M. Central Daylight Time, lanceind@earthlink.net writes:
I am using OTS equipment and am very happy with it . I have a couple of
SSB-2010s for use in the sub (or subs) and a STX-101 Surface unit . I did
alot of research before I made any purchases. OTS has been in business for
over 25 years and manufactures a reliable product .
Spliceing the wire to an electrical penetrator is no big deal , just make
sure to reconnect the outer shield .
Cliff Redus is also using OTS . Go to the Psubs Web site , click on
"Resources and References" on the Top drop down menu , then click on
communications on the left hand side column. Cliff did an outstanding job
of documenting his setup !
Dan Lance
> [Original Message]
> From: Jon Wallace <jonw@psubs.org>
> To: <personal_submersibles@psubs.org>
> Date: 8/27/20! 10 10:06:56 AM
> Subject: Re: [PSUBS-MAILIST] Underwater Communications
>
>
> James,
>
> I'm pretty sure both Alec and Dan are using the OTS models, and I
> haven't heard anyone complain about cutting the wire and reconnecting it
> affecting performance.
>
> Jon
>
>
>
> On 8/26/2010 11:13 AM, James Frankland wrote:
> >
> > Hi All,
> >
> > Does anyone have any experience with the OTC dive communicator, or the
> > divelink model.
> >
> > http://www.divelink.net/beltmounted.htm
> >
> > http://www.oceantechnologysystems.com/ssb_2010.shtml
> >
> > I am considering using either one of these for sub to surface
> > communications.
> >
> > From the websites, it looks like i would be able to buy 2 of the
> > surface communication sets. 1 on the boat unmodifi! ed and the other on
> > the sub with the antene !
pass! in
g thro ugh a bulkhead connector.
> >
> > Has anyone used these before? Does anyone know if cutting the antene
> > and passing it through a bulkhead connector would effect the
performance?
> >
> > Kind Regards
> > James
> >
>
>
>
>
> ************************************************************************
> ************************************************************************
> ************************************************************************
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003. Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> r! emoveme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of
> our server receiving your request.
>
> PSUBS.ORG
> PO Box 53
> Weare, NH 03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either yo! u, or someone you know, requested you receive messa!
ges
f
rom! our org anization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.
PSUBS.ORG
PO Box 53
Weare, NH 03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************
|