|
Dan or Cliff I have another question for you.
How do you turn the 2010 on? It seems a little silly
to
put in a bucket of water hehhe
Dean
In a message dated 8/29/2010 10:37:36 A.M. Central Daylight Time,
Recon1st@aol.com writes:
Dan that's what I thought. Thanks much for the
input.
Dean
In a message dated 8/28/2010 2:59:04 P.M. Central Daylight Time,
lanceind@earthlink.net writes:
Dean,
When you cut the transducer extension cable
that comes with CDK-6 kit there is an outer braided aluminum shield
and one center copper conductor cable. You will need to solder both
the copper conductor and the braided shield to corresponding pins on the
electrical penetrator so there is continuity for proper functioning of the
comms. ( Just gather the braided shield together enough so
it fits into one of the conductor pins on the penetrator).
Dan Lance
----- Original Message -----
Sent: 8/28/2010 1:11:14 PM
Subject: Re: [PSUBS-MAILIST]
Underwater Communications
Dan I have just received my SSB-2010 and a STX-101. I am
confused on what you
mean by reconnect the outer shield. I have not received my
CDK-6- kit yet but I am
thinking a couple of wires with a braided or aluminum shield.
Do you mean attaching the shield with a thru
conductor?
Dean
In a message dated 8/27/2010 6:51:00 P.M. Central Daylight Time,
lanceind@earthlink.net writes:
I
am using OTS equipment and am very happy with it . I have a couple
of
SSB-2010s for use in the sub (or subs) and a STX-101 Surface unit
. I did
alot of research before I made any purchases. OTS has been in
business for
over 25 years and manufactures a reliable product .
Spliceing the wire to an electrical penetrator is no big deal
, just make
sure to reconnect the outer shield .
Cliff Redus is
also using OTS . Go to the Psubs Web site , click on
"Resources and
References" on the Top drop down menu , then click on
communications
on the left hand side column. Cliff did an outstanding job
of
documenting his setup !
Dan Lance
> [Original
Message]
> From: Jon Wallace <jonw@psubs.org>
> To:
<personal_submersibles@psubs.org>
> Date: 8/27/20! 10
10:06:56 AM
> Subject: Re: [PSUBS-MAILIST] Underwater
Communications
>
>
> James,
>
> I'm pretty
sure both Alec and Dan are using the OTS models, and I
> haven't
heard anyone complain about cutting the wire and reconnecting it
> affecting performance.
>
>
Jon
>
>
>
> On 8/26/2010 11:13 AM, James
Frankland wrote:
> >
> > Hi All,
> >
>
> Does anyone have any experience with the OTC dive communicator, or
the
> > divelink model.
> >
> >
http://www.divelink.net/beltmounted.htm
> >
> >
http://www.oceantechnologysystems.com/ssb_2010.shtml
>
>
> > I am considering using either one of these for sub to
surface
> > communications.
> >
> > From the
websites, it looks like i would be able to buy 2 of the
> >
surface communication sets. 1 on the boat unmodifi! ed and the
other on
> > the sub with the antene pass! ing thro ugh a
bulkhead connector.
> >
> > Has anyone used these
before? Does anyone know if cutting the antene
> > and
passing it through a bulkhead connector would effect
the
performance?
> >
> > Kind Regards
> >
James
> >
>
>
>
>
>
************************************************************************
>
************************************************************************
>
************************************************************************
>
The personal submersibles mailing list complies with the US
Federal
> CAN-SPAM Act of 2003. Your email address appears
in our database
> because either you, or someone you know,
requested you receive messages
> from our
organization.
>
> If you want to be removed from this
mailing list simply click on the
> link below or send a blank
email message to:
> r!
emoveme-personal_submersibles@psubs.org
>
> Removal of your
email address from this mailing list occurs by an
> automated
process and should be complete within five minutes of
> our server
receiving your request.
>
> PSUBS.ORG
> PO Box
53
> Weare, NH 03281
> 603-529-1100
>
************************************************************************
>
************************************************************************
>
************************************************************************
************************************************************************
************************************************************************
************************************************************************
The
personal submersibles mailing list complies with the US
Federal
CAN-SPAM Act of 2003. Your email address appears in our
database
because either yo! u, or someone you know, requested you
receive messages
from! our org anization.
If you want to be
removed from this mailing list simply click on the
link below or send
a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email
address from this mailing list occurs by an
automated process and
should be complete within five minutes of
our server receiving your
request.
PSUBS.ORG
PO Box 53
Weare, NH
03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************
|