[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] oil compensating



What if you flood a thruster? Sea water will migrate to find the lowest point(s). I'd do them separate. In my experience, that isolates problems without causing any.
Vance



-----Original Message-----
From: Emile van Essen <emile@airesearch.nl>
To: personal_submersibles@psubs.org
Sent: Sun, May 23, 2010 4:40 pm
Subject: RE: [PSUBS-MAILIST] oil compensating

Brian,

Together okay, but make the bellow not too small. Count for 5 to 10% volume
chance.

Emile

-----Oorspronkelijk bericht-----
Van: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org] Namens Brian V. Ryder
Verzonden: zondag 23 mei 2010 3:33
Aan: personal_submersibles@psubs.org
Onderwerp: RE: [PSUBS-MAILIST] oil compensating

And yet again one more question oil filled should I plum them all together
and put a small bellow so there also pressure compensated? These are all
questions running thru my head 

Brian V. Ryder
brian@subatlantic.com

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential
and privileged information or otherwise be protected by law. Any
unauthorized review, use, disclosure or distribution is prohibited. If you
are not the intended recipient, please contact the sender by reply e-mail
and destroy all copies of the original message. 


-----Original Message-----
From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org] On Behalf Of Brian V. Ryder
Sent: Saturday, May 22, 2010 9:07 PM
To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST] oil compensating

Hello all
I have a question< I am reassembling my motors and contemplating oil
compensating them, there 4 hp 2900 RPM 36 volt DC and on the back of the
motor is the reversing solenoids 4 of them, no I understand from reading
that WD40 works great, what do I have to do to oil compensate them and will
the solenoids work there just a single throw 12volt solenoid like ones found
on a early model ford, I don't think the rmp loss will be an issue, when I
bench tested it today it spun up and blew the motor control manual all over
the deck all 68 pages, any thoughts would greatly be appreciated  
thanks
Brian V. Ryder
brian@subatlantic.com

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential
and privileged information or otherwise be protected by law. Any
unauthorized review, use, disclosure or distribution is prohibited. If you
are not the intended recipient, please contact the sender by reply e-mail
and destroy all copies of the original message. 





************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
    removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
    removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************

Geen virus gevonden in het binnenkomende-bericht.
Gecontroleerd door AVG - www.avg.com 
Versie: 9.0.819 / Virusdatabase: 271.1.1/2887 - datum van uitgifte: 05/21/10
08:26:00




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
    removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************