[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST] skids

To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST] skids
From: "Daniel Lance" <lanceind@earthlink.net>
Date: Sun, 14 Feb 2010 17:52:47 -0500
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=dk20050327; d=earthlink.net; b=AdZENRuMQfmYw+s6jC7/6qtAXkNbIKFBd1HlNWg0gq/W++X9WkTwSbMJtuTE4hz5; h=Received:Message-ID:X-Priority:Reply-To:X-Mailer:From:To:Subject:Date:MIME-Version:Content-Type:X-ELNK-Trace:X-Originating-IP;
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Scott,

If you can find an I beam close to the dimensions on the prints then go for it. Otherwise you will have do it the old fashion way.

Dan Lance

----- Original Message -----

From: Scott Waters

To: psubs

Sent: 2/14/2010 5:14:32 PM

Subject: [PSUBS-MAILIST] skids

What do you use for the skids under the battery pods for the K-350? Is it "I" beam cut in half to make "T"s? I am ready to put the battery pods on the sub, but I wanted to put the skids on first. Any help would be most appriciated!
Thanks,
Scott Waters

Hotmail: Free, trusted and rich email service. Get it now.

Prev by Date: RE: [PSUBS-MAILIST] Lighting
Next by Date: [PSUBS-MAILIST] high output led supply
Previous by thread: Re: [PSUBS-MAILIST] skids
Next by thread: Re: [PSUBS-MAILIST] skids
Index(es):
- Date
- Thread