Re: [PSUBS-MAILIST] pipe problems

XXH or XXS means Double Extra Heavy (or Strong). A 1/2" nipple, for instance, has 1/4" walls. A 1" SS pipe at HHX strength (Schedule 160) has a burst pressure of over 6000 psi. The other kind of 1/2" nipple (David, you old letch) is another topic altogether.

-----Original Message-----
From: vbra676539@aol.com
To: personal_submersibles@psubs.org
Sent: Tue, Feb 2, 2010 6:25 pm
Subject: Re: [PSUBS-MAILIST] pipe problems

How about: http://www.lcpvf.com/Products/Nipples/nipples.html

Vance

-----Original Message-----
From: Dan H. <Jumachine@comcast.net>
To: personal_submersibles@psubs.org
Sent: Tue, Feb 2, 2010 5:41 pm
Subject: Re: [PSUBS-MAILIST] pipe problems

Scott,

I used a chunk of round stock steel that I turned to the proper OD and bored it to the ID of XXH pipe then put a pipe thread on each end. I searched for pipe nipples but couldn't find them either.

Dan H.

----- Original Message -----

From: Scott Waters

To: psubs

Sent: Sunday, January 31, 2010 12:43 PM

Subject: [PSUBS-MAILIST] pipe problems

where in the heck can you find 1 1/2" LG XXH pipe? I only need like 2 feet (not 21' sticks)
Thanks,
Scott Waters

Hotmail: Free, trusted and rich email service. Get it now.