[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PSUBS-MAILIST] Thru-hulls

To: personal_submersibles@psubs.org
Subject: [PSUBS-MAILIST] Thru-hulls
From: "kocpnt tds.net" <kocpnt@tds.net>
Date: Sat, 23 Jan 2010 16:04:28 -0600
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

This question is for the more experienced psubbers out there.

I know SOP is to put a valve inside of any hull penetration. If using a professionally built thru-hull (SubConn) is this still important in your opinion.

Best Regards,

Jim K

Follow-Ups:
- Re: [PSUBS-MAILIST] Thru-hulls
  - From: vbra676539@aol.com
- RE: [PSUBS-MAILIST] Thru-hulls
  - From: "Jay K. Jeffries" <bottomgun@mindspring.com>

Prev by Date: Re: [PSUBS-MAILIST] First submarine dive
Next by Date: Re: [PSUBS-MAILIST] First submarine dive
Previous by thread: Re: [PSUBS-MAILIST] SubConn
Next by thread: Re: [PSUBS-MAILIST] Thru-hulls
Index(es):
- Date
- Thread