Hi Rick,
You might want to take a look at the battery
cases offered by Deep Sea Power & Light. They are oil compensated, rated
for full ocean depth, come with connectors and are ABS certified. You can order
a set and have them on your sub next week. Ask for Kevin Hardy.
Greg
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of landnseawelding
Sent: Wednesday, January 06, 2010
10:21 PM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST]
My thought was to try and sandblast the
inside lower half of the pod for good adhesion then lay up resin with matt in
it as the resin by itself would crack. I would then back that up by having my
batteries in ss drip trays. I think I have both at my shop and
will do a test on each and report the results when finished.
----- Original Message -----
Sent: Wednesday, January 06, 2010 4:36 PM
Subject: Re: [PSUBS-MAILIST]
Does fiberglass resin react to battery
acid?
Let me add......resin by itself without
the glass is very weak.