[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
Re: [PSUBS-MAILIST] Proposed PSUBS standard bulkhead connector
To
:
personal_submersibles@psubs.org
Subject
: Re: [PSUBS-MAILIST] Proposed PSUBS standard bulkhead connector
From
:
shellydalg@aol.com
Date
: Thu, 17 Dec 2009 20:52:35 EST
Reply-to
:
personal_submersibles@psubs.org
Sender
:
owner-personal_submersibles@psubs.org
Me again, I got the document down and it looks like the part # BH4F is 1/2 inch diameter male threaded.
Is that correct ?
Frank D.
Follow-Ups
:
Re: [PSUBS-MAILIST] Proposed PSUBS standard bulkhead connector
From:
Jon Wallace <jonw@psubs.org>
Prev by Date:
Re: [PSUBS-MAILIST] RFC - Standard Thru-Hull Electrical Connector
Next by Date:
Re: [PSUBS-MAILIST] Reserve buoyancy
Previous by thread:
Re: [PSUBS-MAILIST] Proposed PSUBS standard bulkhead connector
Next by thread:
Re: [PSUBS-MAILIST] Proposed PSUBS standard bulkhead connector
Index(es):
Date
Thread