[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] my old sub getting new parts



Hi Les,
 
Good to hear from you again. I'm not making as much progress as we are still quite busy with my work. I have however moved the sub into the shop and have completed final of one through hull ( the actuator to vent the two soft tanks) Unfortunately this is the only work completed since last Spring. I have ordered my main inlet valve and will be assembling it to the main manifold next.
 
Best Regards,
 
Jim K

On Mon, Nov 30, 2009 at 8:18 PM, marki katschor <lesmarki@triton.net> wrote:
        Hay Frank, entrance way has a round balked,, a half round wall from floor to ceiling at the hatch .  Les
----- Original Message -----
Sent: Sunday, November 29, 2009 5:16 PM
Subject: Re: [PSUBS-MAILIST] my old sub getting new parts

In a message dated 11/28/2009 8:32:45 A.M. Pacific Standard Time, lesmarki@triton.net writes:
entrance way has a round balked
 that goes from deck to overhead, are you going to have somthing like that?
Hi Les. Good to hear from you. Finally got a chance to look at your new pics. I really like the water heater tanks you added. That should give you a real stable boat on the surface. It's nice to have a little deck space. Lookin real good.
I don't know what a "round balked" is.
Anyway, I've got the sub dis-assembled as I'm still welding the ballast tanks, but I hope to get some new pics up soon.
I think I have a solution to the window problem but probably won't make the changes till after next year's convention.
 I'm working on a combination drop weight/roller plate that will allow me to move the sub around and get some better pictures. The skinny slot where I'm building it next to the shop is too narrow to turn it or get far enough away to get a good shot.
Your old sub is looking good. Nice advertising for his business too!
Say hi to Marki and have a good holiday. Hope to see you both soon. Frank D.