[PSUBS-MAILIST] Jim K's epoxy

["Brian Cox" <ojaivalleybeefarm@dslextreme.com>]

Message for Jim K.  -  finally got to use some of that epoxy that you sent
me.  I have used it for a ferro-cement wood fired hot tub that I built last
year, I installed additional water heating pipes in the incorporated cement
fireplace that heats the water.  This is very close to the same application
that I will use on my sub so it will serve as instruction for that.  The
epoxy is a 2 to 1 mix and it seems to adhere very well, I applied it on the
concrete area that will see water.   Also made a penetration and epoxied in
a one inch pipe through the ferro cement for a drain plug.  Very gooie
stuff, but it sets up great,  with the cab-o-sil that I added it made it
very easy to position the gooped up piece of pipe into place.

Brian




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************