[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST]



Thanks Frank, Have sent them and enquiry,  Chs Hugh

 

 

From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of ShellyDalg@aol.com
Sent: 31 July 2009 01:27
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST]

 

Hi Hugh. Another supplier ( I haven't used them ) is L.A. Boiler. They make smaller tank heads from most any metal. I used Fort Worth F & D Tank Heads for my 84 inch AS516Gr70 heads. They were spun from 3/8 inch steel plate.

Remember that when they spin heads, the "knuckle" area gets thinner so you need to specify the thickness at the thinnest spot. They will increase the plate thickness to give you the minimum at the thinnest part.

Frank D.

 




__________ Information from ESET NOD32 Antivirus, version of virus signature database 4289 (20090729) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature database 4292 (20090730) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com