[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Kreideseesub



Sorry, I'd forgotten. My apologies. It isn't something someone should forget. Besides, I've been to Amsterdam (if you count changing flights at the airport, that is. Are the main ballast tanks grp? The stern fairing?
Vance


-----Original Message-----
From: Emile van Essen <emile@airesearch.nl>
To: personal_submersibles@psubs.org
Sent: Tue, 20 Jan 2009 2:59 pm
Subject: RE: [PSUBS-MAILIST] Kreideseesub

Vance… I live in the Netherlands. I know it is hard to find on the map so say I live 40 Kms north of Amsterdam ;-)
 
But right, the Kreideseesub is half German. Carsten does designwork and the main ballasttanks from Bremen. A friend from Berlin makes the mould for the stern fairing
 
Emile
 

Van: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] Namens vbra676539@aol.com
Verzonden: dinsdag 20 januari 2009 21:35
Aan: per sonal_submersibles@psubs.org
Onderwerp: Re: [PSUBS-MAILIST] Kreideseesub
 
5C? I'd forgotten how cold it gets. We spent a lot of time at the shipyards in Bremerhaven years ago, but the Scotch Bar was just across the street and there were always pretty university girls to argue politics with. Not too fond of Americans, as I recall. That was hard to figure out as several of them told me that with their head on my pillow! Great times in Germany, great times.

I will keep checking the picture site for updates. I should have asked originally about hull dimensions. It looks small, but is hard to figure how small.

5C! I have to check for coats in my closet.

Vance


-----Original Message-----
From: Emile van Essen <emile@airesearch.nl>
To: personal_submersibles@psubs.org
Sent: Tue, 20 Jan 2009 12:02 pm
Subject: RE: [PSUBS-MAILIST] Kreideseesub
Hi Vance,
< FONT face=Arial color=navy size=2> 
The hull is constructed right at this moment!.  I  build and a professional welder does the welding. Great team!!
I started last week and with a few days the heavy steel work20is done.  The picture site will be updated soon.
 
We have to preheat thick steel here cos it is les than 5 C. inside..
 
Front viewport is 580 mm O.D @ 135 Deg.
 
Best regards, Emile
 
Alkmaar, the Netherlands
 
 
 

Van: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] Namens vbra676539@aol.com
Verzonden: dinsdag 20 januari 2009 11:16
Aan: personal_submersibles@psubs.org
Onderwerp: [PSUBS-MAILIST] Kreideseesub
 
=0 A
Emile,

Hello from Florida. The weather here was 25C yesterday, but with a lot of wind. Not a good day for small submarines offshore, I'm afraid, so I have been writing about my version of the Kreideseesub. In my book, it is May and the sub is working on the seabed north of Iceland. And the weather is very nice, but cold. No one gets seasick in my book unless I say so!!!

I see the Kreideseesub hull com ponents are built. How is the fabrication going? I am anxious to see the interior layout. What diameter is the forward viewport?

Hope all is well with you in Germany. Happy New Year. May it be a prosperous and successful one for you.

Best Regards,
Vance



-----Original Message-----
From: Emile van Essen <emile@airesearch.nl>
To: personal_submersibles@psubs.org
Sent: Fri, 12 Dec 2008 6:26 am
Subject: [PSUBS-MAILIST] Drebbel to Kreideseesub
Hi,
 
The plan of my earlier mentioned project “Drebbel” chanced a little.
The owner of the divebase at lake Hemmoor wanted to have a sub.
Specs are pretty close to my earlier plans so Carsten and I made a agreement with him. We design and produce parts and the sub will be sold as a building kit.
http://ww w.airesearch.nl/index_bestanden/Page424.htm  click on “kreidesseesub” I hope to inspire people with the picture log!
We hope to launch in summer 2009.
 
Best regards, Emile van Essen
 
 < /div>
 
 
No virus found in this incoming message.
Checked by AVG -
http://www.avg.com

Version: 8.0.176 / Virus Database: 270.10.9/1900 - Release Date: 19-1-2009 20:52
 

No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.10/1903 - Release Date: 19-1-2009 20:52