[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PSUBS-MAILIST] Soft ballast venting valve
Hi Frank,
if I'm reading this correctly, you can only blow your main tanks
once while at operating depth. Have you considered increasing
the amount of compressed air you carry so you have more chances
of surfacing? I think ABS recommends enough air to blow the main
tanks 6 times at operating depth (somebody correct me if I'm wrong,
I don't have the ABS book in front of me).
Thanks for the pictures, this sub looks really unique! I still
want to come and visit you soon!
Cheers,
Ian.
-----Original Message-----
>From: ShellyDalg@aol.com
>Sent: Jan 5, 2009 11:48 AM
>To: personal_submersibles@psubs.org
>Subject: Re: [PSUBS-MAILIST] Soft ballast venting valve
>
>Hi Dean. Good to hear from you again. Ya, it's the speed (or lack of) that
>the bigger valves addresses. If the typical dive is fairly deep and you only
>need to go down and up once or twice it's probably not an issue. But if you
>want to go up and down a lot like cruising shallow waters it may make it
>easier/faster to have large valves. I should be able to blow my tanks dry 4 times
>at the surface without using the reserve tanks. If I need to blow while still
>deep, maybe only once. Going to try to avoid that, but if you did have to
>blow air in while deep, and then you started to "shoot" to the surface, a bigger
>valve might come in handy to dump some expanding air and slow your ascent.
>Frank D.
>**************New year...new news. Be the first to know what is making
>headlines. (http://www.aol.com/?ncid=emlcntaolcom00000026)
************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003. Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.
If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.
PSUBS.ORG
PO Box 53
Weare, NH 03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************