|
Frank, Looking good! You hard work and attention to detail shows
through. R/Jay Respectfully, Jay K. Jeffries Andros Is., Bahamas As scarce as the truth is, the supply has always been in excess of
the demand. -Josh Billings From:
owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org] On Behalf Of ShellyDalg@aol.com Hi guys. Well, here's a couple of new pics. The dive planes have a
socket for dive lights, so the light shines in the direction of travel. The
fairings still need a little finish work but the cold damp weather means I'll
have to wait on that. The patterns for the stainless ballast tanks are made but
I haven't bought the sheets yet. Material cost for the stainless is about $3500
and that will be the next components to build. The rear motor mounts/rudders
are done and I'll be using hydraulic cylinders to actuate the rudders and dive
planes. Greg. C. gave me a source for the 3 inch plexi and I will order
that next week and get it machined locally. Haven't found anyone locally yet
who does plexi annealing, but that will work out eventually. Just a little
progress each day. Thanks for all your help. Have a good New Year, Frank D.
New year...new news. Be the first
to know what is making headlines. |