[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Removing Front MBT

You're a lot of help Jeffries.
V


-----Original Message-----
From: Jay K. Jeffries <bottomgun@mindspring.com>
To: personal_submersibles@psubs.org
Sent: Thu, 11 Dec 2008 9:45 am
Subject: RE: [PSUBS-MAILIST] Removing Front MBT

Follow with a match to remove any foam remnants and to clean out the gasoline. J  you may need to stand clear though!
R/Jay
 
Respectfully,
Jay K. Jeffries
Andros Is., Bahamas
 
As scarce as the truth is, the supply has always been in excess of the demand.
    -Josh Billings
 
 
 
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of Smyth, Alec
Sent: Thursday, December 11, 2008 10:24 AM
To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST] Removing Front MBT
 
If you use foam for those molds, you can skip the step of cutting the tanks open to remove the molds from inside. Just pour a little gasoline into them and the foam molds turn into a puddle within seconds.