|
Follow with a match to remove any foam remnants and to clean out
the gasoline. J you may need to stand clear though! R/Jay Respectfully, Jay K. Jeffries Andros Is., Bahamas As scarce as the truth is, the supply has always been in excess of
the demand. -Josh Billings From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org] On Behalf Of Smyth, Alec If you use foam for those molds, you can skip the step of cutting
the tanks open to remove the molds from inside. Just pour a little gasoline
into them and the foam molds turn into a puddle within seconds.
|