[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Greenland Shark Hits Sub

To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] Greenland Shark Hits Sub
From: vbra676539@aol.com
Date: Mon, 08 Dec 2008 08:09:28 -0500
In-reply-to: <BLU111-W501408DAB30F9045BD4EADD6FD0@phx.gbl>
References: <BLU111-W501408DAB30F9045BD4EADD6FD0@phx.gbl>
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Brent, The pressure hulls on the JSLs are currently five and a quarter inches thick, if I'm not mistaken. Vance

-----Original Message-----
From: Brent Hartwig <brenthartwig@hotmail.com>
To: PSUBSorg <personal_submersibles@psubs.org>
Sent: Mon, 8 Dec 2008 12:47 am
Subject: [PSUBS-MAILIST] Greenland Shark Hits Sub

They mention in the video that the acrylic in that Harbor Branch sub is only one inch thick. They must of been mistaken. Interesting clip none the less.

http://videos.howstuffworks.com/discovery/6924-greenland-shark-hits-sub-video.htm

Regards,
Szybowski

=

Listen to 350+ music, sports, & news radio stations – including songs for the holidays – FREE while you browse. Start Listening Now!

Follow-Ups:
- RE: [PSUBS-MAILIST] Greenland Shark Hits Sub
  - From: Brent Hartwig <brenthartwig@hotmail.com>

References:
- [PSUBS-MAILIST] Greenland Shark Hits Sub
  - From: Brent Hartwig <brenthartwig@hotmail.com>

Prev by Date: RE: [PSUBS-MAILIST] The Kaiten Heaven Shaker
Next by Date: Re: [PSUBS-MAILIST] Lifting K-250 Off Trailer the Hard Way
Previous by thread: RE: [PSUBS-MAILIST] Greenland Shark Hits Sub
Next by thread: RE: [PSUBS-MAILIST] Greenland Shark Hits Sub
Index(es):
- Date
- Thread