At the risk of being way in the outfield...I just ordered a shaft seal intended for a 1" shaft rotating at a maximum of 270 shaft RPM with an external outside water pressure of 66 psi (I do not intend to go farther down than this) This is in the early stages of research. My drive shaft is 10' long max with a 10-1 gear reduction powered by a 1hp dc 24v motor with a max rpm of 1720. The battery arrangment has yet to be determined. The cost of this double seal is close to $80.00 and does not cover the enclsure. The prop is 18" in diameter and has seven blades. A second reduction gear containes 14-1 should this propellor not withstand this higher rotation force. The blades are individually changed and the overall performance so altered. I intend to incorporate PWM for control and adjustments for power efficiency.
Change the world with e-mail. Join the i’m Initiative from Microsoft. |