[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST]

To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST]
From: Ray Keefer <psubs2001@yahoo.com>
Date: Sun, 25 May 2008 13:16:40 -0700 (PDT)
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=X-YMail-OSG:Received:Date:From:Subject:To:In-Reply-To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID; b=gWKuFoKEhMltSlrszbkz/REgq81icExOrUzAL0GrS+p4PSzehyoTveHZ+Uem4D8JlRIlGMM8JPpsUmRHBV/qO/bgYFwSD8rWgENXWDTqvqBltsFHcwYtvEt6nnmp1fnLQPCKD17PqP+UY8olBI5E0kb5I/YGZsW7i/rfFJT8nLg=;
In-reply-to: <4838a67f.1e078e0a.29f5.ffffb856@mx.google.com>
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Hi Hugh,

Could be that ABS wasn't so stringent hen the Kittredge boats got certified. They may not pass if the designs were submitted now.

Regards,

Ray

Hugh Fulton <hc.fulton@gmail.com> wrote:

I would like to ask a question which I have struggled with in that the ABS specifies hull thickness of no less than 0.375? excluding corrosion allowance and yet Kittredge designs are supposedly to ABS and are ¼? thick.. can anyone explain how they claim to be ABS design.

Hugh

Follow-Ups:
- Re: [PSUBS-MAILIST]
  - From: " Dan. H." <jumachine@comcast.net>

References:
- [PSUBS-MAILIST]
  - From: "Hugh Fulton" <hc.fulton@gmail.com>

Prev by Date: Re: [PSUBS-MAILIST] Newbie
Next by Date: RE: [PSUBS-MAILIST] Newbie
Previous by thread: Re: [PSUBS-MAILIST]
Next by thread: Re: [PSUBS-MAILIST]
Index(es):
- Date
- Thread