[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [PSUBS-MAILIST]

To: <personal_submersibles@psubs.org>
Subject: RE: [PSUBS-MAILIST]
From: "Jon Wallace" <jon@psubs.org>
Date: Sun, 24 Feb 2008 14:15:17 -0500
Importance: Normal
In-reply-to: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAdTtPGXrI406ZM91Cf+q418KAAAAQAAAAgkmOyelO5kCJGCbo6F5A8gEAAAAA@airesearch.nl>
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Hi Emile,

Very impressive photos. I'm curious if you have facilities to anneal the dome after machining? Also, can you quantify "small scale sale"? What's your capacity for production and/or desire for production? Psubbers are always looking for suppliers.

Jon

Follow-Ups:
- RE: [PSUBS-MAILIST] Acrylic dome (was rotary table)
  - From: "Emile van Essen" <emile@airesearch.nl>

References:
- RE: [PSUBS-MAILIST]
  - From: "Emile van Essen" <emile@airesearch.nl>

Prev by Date: RE: [PSUBS-MAILIST] Rotary Table for Drilling View Ports and the Like
Next by Date: RE: [PSUBS-MAILIST] Rotary Table for Drilling View Ports and the Like
Previous by thread: RE: [PSUBS-MAILIST]
Next by thread: RE: [PSUBS-MAILIST] Acrylic dome (was rotary table)
Index(es):
- Date
- Thread