Re: [PSUBS-MAILIST] pressure pods

["Joseph Perkel" <joeperkel@hotmail.com>]

Dean,

The K-350 uses plain old schedule 40 pipe for these with end-caps. While the 
material may be easy, the shaft thru hull, and end-cap detail is 
proprietary, and well worth the investment for a set of plans.

Joe


> From: Recon1st@aol.com
> Reply-To: personal_submersibles@psubs.org
> To: personal_submersibles@psubs.org
> Subject: Re: [PSUBS-MAILIST] pressure pods
> Date: Sun, 17 Jun 2007 10:52:56 EDT
>
> Hey guys need an opinion. I am working on my main
> thrust motor pod. And need to make a decision.
>
> I am using an air compressor tank rated at
> 400 psi. My decision is to use a regulator and
> pressure valve to maintain or just crank pressure
> into it say 165 lbs and leave it there.
>
> I am only going to a max of 350 ft and it seems
> to me the added regulation and valves could be
> solved if I can make the pressure vessel just
> hold air pressure.
>
> Motor is 72 volt DC 12 hp and my thrusters will
> be oil filled trolling motors
>
> Dean Ackman
>
> just a building away name is "1st Recon 1". Will get frapper
> and load pics as soon as I have somthing other than a
> stock K350 to show.
>
>
>
> ************************************** See what's free at 
> http://www.aol.com.





************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************