Jon and others,
The C-quester from
Uboatworx has no vertical hull. It has a hull type like Deepworker or deepfilght
502
Withhout the GRP outer
hull it looks a bit like deepworker regarding the batt. Pods.
There was a French
manufacturer that used a upright acrylic cylinder.
Emile
Van: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] Namens Jon Wallace
Verzonden: donderdag 10 mei 2007
14:03
Aan: personal_submersibles@psubs.org
Onderwerp: RE: [PSUBS-MAILIST]
Vertical Hulled Sub
uboatworx uses that design.
-----Original Message-----
From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org]On Behalf Of Ken F
Sent: Thursday, May 10, 2007 7:25
AM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST]
Vertical Hulled Sub
Has anyone else built or created any design ideas using a vertical hull
for a one person, very small sub? where you would sit upright, and view
out the dome which is also the hatch? I've solved what I think are many
of the design problems inherent, but there's usually always someone who's
thought of something else, or has more experience. Anyone?
Ken
Bored
stiff? Loosen up...
Download and
play hundreds of games for free on Yahoo! Games.