RE: [PSUBS-MAILIST] Depth test at convention?

Alec,

How much water are you looking for? Once you supply that info, will give you a range and azimuth from Holland’s breakwater. Would guess that there is a ramp close to the inlet at the park on the north side of the harbor.

R/Jay

Respectfully,

Jay K. Jeffries

Andros Is., Bahamas

A skimmer afloat is but a submarine, so poorly built it will not plunge.

From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of Smyth, Alec
Sent: Wednesday, May 09, 2007 1:38 PM
To: personal_submersibles@psubs.org
Subject: [PSUBS-MAILIST] Depth test at convention?

I'm wondering if the convention might afford an opportunity to depth test my K-250. Dave Heinzig, Snoopy's builder, depth tested her to a simulated 400 feet in a vessel used for pressure treating lumber. However, since then the pressure hull has undergone major surgery, so a re-test would be in order. I could get to the convention a day or two early to do this, but is there anyone local who might volunteer the use of a tow boat, and know of a suitable location within towing distance of Holland? Or… anywhere else that's on the way from Virginia to Michingan.

Thanks,

Alec

The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it.