[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Pressure relief valve?



Alec,

Carsten built a check valve in the sgt. Peppers. He choose a large diameter
that allows a rapid ascent when overpressurised.
The flat seal leaks at low pressure so that will I replace by an O- ring.
there is no vacuum when you surface so there is no danger of that tragic
Soyuz accident.

Regards, Emile

----- Original Message ----- 
From: "Alec Smyth" <Alec.Smyth@compuware.com>
To: <personal_submersibles@psubs.org>
Sent: Tuesday, September 21, 2004 7:25 AM
Subject: [PSUBS-MAILIST] Pressure relief valve?


> I'm wanting to install a pressure relief valve to cover against a pressure
buildup in the cabin popping off the dome upon surfacing. The idea would be
to put this valve directly onto the ambient pressure line that leads to the
depth meter, so as to use an existing through-hull. If pressure in the cabin
exceeded ambient, it would bleed off to the outside. I bought a check valve
that's a simple nylon ball and spring affair, good to 400 psi, but it
doesn't seem to seal 100% effectively at low pressure. Does anyone have a
recommendation?
>
> thanks,
>
> Alec
>
>
>
>
> ************************************************************************
> ************************************************************************
> ************************************************************************
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003.  Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> removeme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of receipt
> of your request.
>
> mailto:removeme-personal_submersibles@psubs.org
>
> PSUBS.ORG
> PO Box 311
> Weare, NH  03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
>




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of receipt
of your request.

mailto:removeme-personal_submersibles@psubs.org

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************