[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Re: hsla steels, trucated cones, X-Plane

To: <personal_submersibles@psubs.org>
Subject: Re: [PSUBS-MAILIST] Re: hsla steels, trucated cones, X-Plane
From: "Adam Lawrence" <adteleka@in-tch.com>
Date: Sat, 5 Jun 2004 14:59:10 -0600
References: <056101c44b15$d8a365c0$c51efea9@abiogen> <000801c44b1b$7ee89b30$5217563f@redusone> <059001c44b2a$c3757160$c51efea9@abiogen>
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

How deep are you wanting to dive?

Adam

----- Original Message -----

From: gordon alexander

To: personal_submersibles@psubs.org

Sent: Saturday, June 05, 2004 12:27 PM

Subject: [PSUBS-MAILIST] Re: hsla steels, trucated cones, X-Plane

Is the Navy is moving to HSLA 80 and 100 and should one expect that these are or will be included in the standards? Perhaps when I query suppliers/fabricators I will find that the price makes this a moot issue.

Can anyone recommend software or speadsheet calculations for evaluating truncated cone sections?

Is there an "X-Plane" for subs?

Gordon Alexander

Follow-Ups:
- Re: [PSUBS-MAILIST] Re: hsla steels, trucated cones, X-Plane
  - From: "gordon alexander" <gordon@curio.com>

References:
- [PSUBS-MAILIST] hsla steels
  - From: "gordon alexander" <gordon@curio.com>
- Re: [PSUBS-MAILIST] hsla steels
  - From: "Cliff Redus" <dr_redus@devtex.net>
- [PSUBS-MAILIST] Re: hsla steels, trucated cones, X-Plane
  - From: "gordon alexander" <gordon@curio.com>

Prev by Date: [PSUBS-MAILIST] Re: hsla steels, trucated cones, X-Plane
Next by Date: [PSUBS-MAILIST] New sub link
Previous by thread: [PSUBS-MAILIST] Re: hsla steels, trucated cones, X-Plane
Next by thread: Re: [PSUBS-MAILIST] Re: hsla steels, trucated cones, X-Plane
Index(es):
- Date
- Thread