RE: [PSUBS-MAILIST] How to trim and ballast bigger boats.

[Hugo Marrero <HMarrero@hboi.edu>]

Carsten,

When I worked in the refit of the LG-50 sub, I re-designed the Ballast
monitoring system. I used a sensor from Omega which worked just fine. The
sensor sent the position of the float through RS-232 into the sub, and I
filled the case of the sensor with transformer oil. They are online at:

http://www.omega.com

hope it helps,

Hugo

-----Original Message-----
From: MerlinSub@t-online.de [mailto:MerlinSub@t-online.de]
Sent: Thursday, May 13, 2004 12:33 PM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] How to trim and ballast bigger boats.


Unfortunatlly I didnt find up today a
cheap and fine seawaterresistant sensor which is pressuretight up to 50
bars for the 1,7 m ( 5,6 feet) high tanks. Any ideas ?

best regards, Carsten




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of receipt
of your request.

mailto:removeme-personal_submersibles@psubs.org

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************