[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Convention topics



Hi Alec,

In 2005 I would like to see Solo at the Convention on the East Coast. You presentation this year would be wonderful.

Regards,
Ray

Alec Smyth wrote:
> 
> I'm shooting to finish Solo by about the end of the year, so she
> definitely won't be ready for the convention. But she'll be 95% done,
> which is probably enough to do a review of the design and construction
> process. I have enough material by now for days, but I guess the most
> one can expect to engage an audience for is probably 2 hours. I think
> I'd organize it as a general introduction to the design objectives,
> followed by a series of very specific practical problems and solutions,
> including perhaps some solutions that I either threw out or am
> considering for the future. We could call the presentation something
> like "Design and fabrication challenges in the construction of a
> hydrobatic submarine".
> 
> All of the expertise is assumed and none of it real, since Solo has not
> been in the water yet. But it'll be fun none the less.
> 
> I know, I know, I owe the group some photo updates...
> 
> Alec
> 
> -----Original Message-----
> From: Ray Keefer [mailto:Ray.Keefer@Sun.COM]
> Sent: Wednesday, April 21, 2004 4:45 PM
> To: personal_submersibles@psubs.org
> Subject: [PSUBS-MAILIST] Convention topics
> 
> Hi,
> 
> I am looking for ideas and presenters for this year's convention in
> Portland, Oregon. Any hams out there? Do any of you have any expertise,
> assumed or real, that you would like to share at the convention?
> Projects, experience, knowledge, white papers,....
> 
> Dave Walls and I are working some ideas already but all is in
> preliminary stages thus too early to announce. However plenty of time
> for your ideas.
> 
> Regards,
> Ray