I am going to get my second load (2500 lbs) of lead next weekend from a gun range. This range has a collection system built into it's trap so that the bullets end up in a 5 gallon bucket. It comes out to 16 cents a pound once all the brass is separated out (about 50%). Wheel weights and lead pipes are contain antimony which is better if your weight is also part of your frame, such as a skid because the antimony adds strength to the lead. But antimony is a pain to melt and keep mixed because it melts at a higher temperature than lead. This gun range is in Arkansas and I'd be happy to put you in touch with the manager there. I've got a web page with lots of details on working with lead if you care to have a look. http://jackson.parcabul.com/sub/lead.html
Biting the Bullet
Doug J
In a message dated 3/18/2004 9:33:37 PM Central Standard Time, jmachine@adelphia.net writes:
I got two and a half five gallon pails full of lead weights from one tire shop. I hit the mother load at that one. We had to unload some from each pail to move them. It cooked down to about three hundred pounds as I recall. I have a total of six hundred pounds, some I collected quite a while back.
It's not hard to melt down. The steel parts float on the top of the molten lead and are easy to scoop off. I made a melting pot out of a piece of six inch diameter pipe and melted it over a wood fire. I have melted it in a bunch of bricks made into a circle stacked about a foot high with an old oil burner gun shooting flames into the pile of bricks with the melting pot inside. That melted it fast. I generally look around and see what I have at hand to do the job.
Tire weights are great. They are available cheep and easy to handle. Also, they aren't pure lead. I don't know what the make up is exactly but they are harder then pure lead.
Dan H.
----- Original Message ----- From: "Pierre Poulin" <pipo305@hotmail.com> To: <personal_submersibles@psubs.org> Sent: Thursday, March 18, 2004 7:44 PM Subject: Re: [PSUBS-MAILIST] Cheap and heavy...
> Dan, > > You said that you got lead from a tire shop. How much did you get? How much > time did it take? > > Thanks! > > Pierre "leadless" Poulin > > > > >From: Steven Mills <cirtemoeg@juno.com> > >Reply-To: personal_submersibles@psubs.org > >To: personal_submersibles@psubs.org > >Subject: Re: [PSUBS-MAILIST] Cheap and heavy... > >Date: Thu, 18 Mar 2004 16:12:51 -0800 > > > >While anyone is at this, I've been looking for lead in bulk. I tried the > >local > >plumbing and contractors supplies, but one needs to have a license in > >order to buy quantity. I tried the boatshops, but most around here are > >into powerboats, so no new or used leaded keels. It can be shot, plug, > >brick....I don't care. > > > >50lbs should suffice for me for now. > > > >--Steve > > > > > >On Thu, 18 Mar 2004 16:41:05 -0500 "Pierre Poulin" <pipo305@hotmail.com> > >writes: > > > > > > No, I'm not talking about my boss... > > > > > > I'm looking for some sort of material to use as drop weight. I need > > > about > > > 700-800 pounds. > > > > > > Any suggestions? > > > > > > Thanks to all! > > > > > > Pierre Poulin > > > > > > _________________________________________________________________ > > > MSN Search, le moteur de recherche qui pense comme vous ! > > > http://fr.ca.search.msn.com/ > > > > > > > > > > > >________________________________________________________________ > >The best thing to hit the Internet in years - Juno SpeedBand! > >Surf the Web up to FIVE TIMES FASTER! > >Only $14.95/ month - visit www.juno.com to sign up today! > > _________________________________________________________________ > MSN Messenger : discutez en direct avec vos amis ! > http://messenger.fr.msn.ca/ > >
|