Re: [PSUBS-MAILIST] Through Hull lever

["Dan H." <JMachine@adelphia.net>]

Pierre,

There may be, I don't really know, but there really isn't much to them.
Anyone with a lathe can whip them out, so I can't imagine it being a stocked
item anywhere.  A K-350 through hull for a shaft rotated by hand is nothing
more then a stainless steel sleeve with two internal O-ring groove, one near
each end.  The rotating shaft is cold rolled stainless round stock.
It's easy to make in any size you need for your application.

Dan H.

----- Original Message -----
From: "pierre&marie" <poulin.carrier@videotron.ca>
To: <personal_submersibles@psubs.org>
Sent: Tuesday, April 29, 2003 10:48 PM
Subject: [PSUBS-MAILIST] Through Hull lever


> Hi there!
>
> Is there some company who do an of the shelf through hull with a shaft in
> it?
>
> Like the one on the K-350 use for the external valves and the drop weight
> mecanism. I think that those are custom made by the builder but I want to
> know if I could buy something close to that.
>
> Thanks!
>
> Pierre Poulin
>
> P.S. Makita means "vibration + noise" in Japan...
>
>