Re: [PSUBS-MAILIST] Acrylic and Plexiglass

["Mark Steed" <plutomark@mail.astate.edu>]

Steven: Thanks a lot. I appreciate it. I am inclined to copy the material I have and just put it out to the group anyway. It is really good information that could be useful to all of us. I'll come up with something. Thanks again for your help. Mark Steed


---------- Original Message ----------------------------------
From: "Steven Mills" <barycenter@earthlink.net>
Reply-To: personal_submersibles@psubs.org
Date:  Wed, 15 Jan 2003 15:07:39 -0800

>Mark,
>
>Sorry, couldn't come up with anything on my end.
>I searched Plasticsnet for the literature and on
>ROHM&HAAS ( surprised that one didn't come up).
>
>Did a Google search the last few nights and....nada !
>
>However, I did discover a site with free lit' on *plexi*
>( .pdf's ). For what it's worth :
>
>http://www.atofinachemicals.com/atoglas/literature-atoglas.cfm
>
>
>--Steve
>
>
>
>>From: Steven Mills <barycenter@earthlink.net>
>> That would be great.
>>
>> There is a plastics forum http://www.plasticsnet.com/
>> that might have contacts. I haven't logged-on in awhile,
>> but I will check for what it's worth.
>>
>> --Steve
>>
>>
>
>> >From: Mark Steed <plutomark@mail.astate.edu>
>> > Greetings all. Success. I have found my missing ROHM&HAAS >factory
>> technical reports on plexiglas design and fabrication. There >are 9 of
>them,
>> all under the heading Of: "PLEXIGLAS DESIGN & >FABRICATION DATA". The
>report
>> titles are as follows:
>> > Everything is here-all the techniques and methods of making just
>>
>...................................snip....................................
>>
>
>
>
>