Re: [PSUBS-MAILIST] Acrylic and Plexiglass

["Andy Jensen" <drewacard@charter.net>]

instead of plexi try PMMA and have you looked at 
www.sdplastics.com
and also
http://www.cyro.com/Internet/Home.nsf/Main2!OpenPage

On Wed, 15 Jan 2003 15:07:39 -0800
  "Steven Mills" <barycenter@earthlink.net> wrote:
>Mark,
>
>Sorry, couldn't come up with anything on my end.
>I searched Plasticsnet for the literature and on
>ROHM&HAAS ( surprised that one didn't come up).
>
>Did a Google search the last few nights and....nada !
>
>However, I did discover a site with free lit' on *plexi*
>( .pdf's ). For what it's worth :
>
>http://www.atofinachemicals.com/atoglas/literature-atoglas.cfm
>
>
>--Steve
>
>
>
>>From: Steven Mills <barycenter@earthlink.net>
>> That would be great.
>>
>> There is a plastics forum http://www.plasticsnet.com/
>> that might have contacts. I haven't logged-on in awhile,
>> but I will check for what it's worth.
>>
>> --Steve
>>
>>
>
>> >From: Mark Steed <plutomark@mail.astate.edu>
>> > Greetings all. Success. I have found my missing 
>>ROHM&HAAS >factory
>> technical reports on plexiglas design and fabrication. 
>>There >are 9 of
>them,
>> all under the heading Of: "PLEXIGLAS DESIGN & 
>>>FABRICATION DATA". The
>report
>> titles are as follows:
>> > Everything is here-all the techniques and methods of 
>>making just
>>
>...................................snip....................................
>>
>
>
>