Re: [PSUBS-MAILIST] Non-skid surface

["Mark Steed" <plutomark@mail.astate.edu>]

I have used the sand and paint technique on several occasions and got good results using silica. The best, by far, is to get hold of some aircraft wing walk material. The type I used came on a roll. It is very easy to cut and is self adhesive. The glue on the back of the stuff is tremendous. I have never had it peel, even on the corners,in a marine environment. Good luck and Happy New Year-Mark Steed


---------- Original Message ----------------------------------
From: "Dan H." <JMachine@adelphia.net>
Reply-To: personal_submersibles@psubs.org
Date:  Wed, 1 Jan 2003 22:38:52 -0500

>I've used white play sand mixed into the paint to make a great nonskid surface.  It doesn't take much sand in the paint to make it nonskid either.  Two hands full in a gallon is plenty.  
>It works great....... unless you try putting it through a paint gun!  
>
>Dan H.
>  ----- Original Message ----- 
>  From: SFreihof@aol.com 
>  To: personal_submersibles@psubs.org 
>  Sent: Wednesday, January 01, 2003 9:16 PM
>  Subject: Re: [PSUBS-MAILIST] Framework around the hull.
>
>
>  In a message dated 1/1/03 2:48:10 PM Eastern Standard Time, tlohm@juno.com writes:
>
>
>    Non-skid is a huge boat problem.   The best answer I ever heard
>    was from a Ross Norgrove book.   
>
>
>  Crushed (pulverized) walnut shells mixed with the paint works for non-skid surface.  You used to be able to buy it at marine supply stores.
>
>  Stan Freihofer 
>  2 man Ambient Dry
>  Ft. Lauderdale 
>
>